There are plenty of reasons why you would want to swap an old intrusion alarm panel for a new one. Sometimes a panel simply needs to be replaced due to age, and sometimes an end user needs a feature that only exists on a new version of the alarm...

Blue Line Gen2 TriTech Motion Detectors (ISCBDL2) use a combination of passive infrared (PIR) and microwave Doppler radar detection with advanced signal processing. The pet‑friendly (‑WP) models generate alarms for human intruders without generating...

AT&T has announced that they will sunset their 3G network in the US on February 22, 2022. If you have Bosch B443 cellular modules that are using the AT&T network, you will need to replace these modules before this deadline because they will stop...

In the past, intrusion detection alarm panels were programmed by entering hexadecimal codes into keypads. This was practical because the alarm panel was limited to a small number of features and you could only choose from a small number of responses.

Not too long ago, a burglar alarm had one job - to let somebody know when an unauthorized person entered a structure. When the panel detected that the protected area had been violated, it had two decisions to make - whether to activate notification...

When designing an intrusion detection system, you want to cover all points of potential penetration. By that, we mean you want to identify every opening in the structure and give the alarm panel some way of determining when a person has used that...

The Bosch Security Manager (BSM) mobile app gives you control over your Bosch B and G Series intrusion panels remotely from your mobile device. With system management at your fingertips, you can control all aspects of your intrusion system,...

We know we can get a bit technical...maybe a little more than a bit technical from time to time. So, here's a short and sweet post that is useful for specifiers and installers of Bosch B9512G and B8512G intrusion alarm control panels. We've created...

Bosch is excited to announce the release of firmware version 3.11 for B and G Series control panels and RPS Remote Programming Software version 6.11.

Bosch motion detectors offer excellent catch performance and the highest level of immunityfrom costly false alarms. They raise the bar for reliability and rapid detection, are easy to install and built to last.

Check out the infographic below >>