Selecting the wrong camera system for your critical infrastructure application can be costly.
We recently wrote about high performance camera systems intended for transportation observation applications. Click here for that article.
Today, a new MIC 7000 camera system was installed on a bridge...for free...just to test drive it. That's the power of a global manufacturer combined with a solid local partnership between the manufacturer's representative and the end user.
This MIC series camera system is part of a "Try Before You Buy" program which allows the transportation entity to test drive a rugged camera system. The MIC is being evaluated as a replacement for nearly two dozen standard dome cameras, many of which have failed once or more since initial installation only a couple years ago.
Why go rugged?
The original cameras installed were standard commercial PTZ domes. These types of domes are usually used quite successfully on the sides of buildings or for interior applications, however, in this case, a rugged system is best suited.
Why?
RUGGED: The heavy, rugged design meets the IEC 60068-2-2:1995 and IAW MIL-STD-167-1A for high frequency, low amplitude vibration and resonant frequency. This is ideal for installation on bridges, in tunnels, and along highways where vibration is significant. Camera failure requires replacement and repair which can be costly and inconvenient.
- CLEAN: The use of a lens wiper allows the user to wipe the camera to keep debris and water from staying in place. Without the wiper, the owner would need to close highway lanes to lower the camera or to use a boom truck to service the camera for something as simple as dirt obscuring the view.
- VIEW: The MIC is not a normal dome design. This camera has no horizon limitation. This means that the camera can be used to observe traffic down below as well as take a look above its horizon at the bridge structure, construction above the camera on the bridge, or at targets in the sky or far away.
- EXTREME: This camera system also provides extreme shock certification IEC 60068-2-27:1987 and the medium weight hammer shock IAW MIL-S-901D (NAVY) certification. NEMA 6P ratings ensure water submersion capability.
Meet MIC...
- More about Bosch MIC Rugged Camera Systems
- Check out this MIC and AutoDome demo at an airport
- Request the Specifier BIM file here
- Contact our team for expert advice and project assistance
In a related topic post, we talked about ruggedized intercom stations for industry, transportation, and critical infrastructure applications. Check it out here...
